Future looks bright for AWT RoboBots contestants

Euclid High School Robotics Team at 2017 AWT RoboBots

(Courtesy of Guest Blogger Joe Powell, HGR’s graphic designer)

It was a gloomy overcast day out at Lakeland Community College for the 2017 AWT RoboBots Competition, but the future looks bright for the students on “The Untouchables” robotics team at Euclid High School. They worked all year at perfecting their weapon, and with early tests it looked like it paid off. The Untouchables were in the pit making last second adjustments while awaiting their match. They looked nervous but eager to see their bot in action.

The morning’s matches began with big hits and fast finishes. The weapons were causing a lot of damage and some matches were over after the first hit. It was Euclid’s turn to step into the octagon. Their weapon looked as impressive in their first match as it did in the test runs. As the bots charged each other, The Untouchables’ weapon struck the first blow hitting the team from Perry, Ohio, hard and disabling their weapon. After a few more hits, Perry was sent scrambling around to try and recover without a weapon. Unfortunately, the drive system for Euclid started to fail, and their mobility was slowed to a plodding stumble. They could hit Perry hard enough to knock them out, but couldn’t move enough to target them. Perry took advantage of this by maneuvering around them and eventually pinning Euclid to the side a few times, earning them points from the judges. Even when Euclid used their one release, Perry was able to use their agility to once again pin The Untouchables. That proved to be too much for the team from Euclid, and they lost a judge’s decision in the first round, which sent them to the consolation bracket.

They were disappointed in the pit. Their weapon could do the job, but moving was an issue and needed remedied. They all jumped on a task and got to work immediately. Time was an issue with the next round beginning in 20 minutes. They had to recharge and make improvements on the fly. Before you knew it, the announcer was calling Euclid to the set-up and weigh-in table. They tested the movement, and it seemed to have improved some, but not to the point they had hoped. It was do-or-die time for The Untouchables.

Their next opponent was a team from Pennsylvania, and Euclid wanted to show what their bot was made of. From the start, the bot wasn’t moving how they wanted it to; so, they planned their attack around their inability to move. The other team worked hard to move around them and hit Euclid hard with their weapon, which sent Euclid’s bot up in the air. When it landed, however, Euclid’s weapon made contact with their gear and knocked their weapon offline. The Pennsylvania team tried to maintain the aggression and pin The Untouchables, which resulted in a few points from the judges. There were just seconds to go when the Pennsylvania team tried to approach one last time. It proved to be their undoing. Euclid’s weapon caught the other team’s bot hard and sent it through the air for a last-second knockout in dramatic fashion. The Untouchables would live to fight another round.

The stage turned to the JuniorBots Competition which gave Euclid over an hour to work on their bot. Coming off their exciting victory, they wanted to get the bot back into the best shape for their next match. Euclid won on a forfeit due to the power failure of the other bot. They needed to win a few more to battle back into the finals bracket, and their next match was a tough one against Kirtland.

Kirtland‘s bot was fast and compact. The weapon was similar to Euclid’s but smaller and more direct in its attack. From the start, Euclid still was moving slowly but adapting well with a defensive strategy. Kirtland was moving around Euclid as if it were testing their defenses. After a few small hits, Kirtland went in for the kill. Euclid took the first few shots like a champ, but their weapon couldn’t lay a good hit on the faster, more agile bot. The Untouchables bot was fighting, but pieces were being torn from it by the other team’s weapon, and its bot was so low to the ground, Euclid couldn’t lift it when it did make contact. As buzzer went off and its bot lay in pieces, The Untouchables day was over.

As I walked out at the end of the day and looked at the sky, it was still gloomy and overcast without a single ray of sun. As I look to the future of Euclid High School robotics, it looks very bright. They have a weapon to be reckoned with and small improvements to be made to the drive system. When it all comes together, I may be writing this same article next year, with a very different outcome.

This year’s winners were repeat champions from 2016, The A-Tech Machinists from Ashtabula. They defeated Beaumont in the final round to go undefeated for the regional bracket and are on their way to the state finals. As a reward, they received the $500 scholarship from HGR Industrial Surplus, which I presented to the winning team.

A-Tech Machinists winning $500 scholarship from HGR Industrial Surplus at 2017 AWT RoboBots

Top 10 questions about HGR Industrial Surplus

HGR Industrial Surplus Showroom Aisle-way

We get questions all the time about what we do, and people are curious about what we sell. So, we put together this Top 10 list of interesting tidbits, trivia and fun facts about HGR for your enjoyment.

What do you do?

HGR Industrial Surplus buys new and used machinery, equipment, furniture, supplies, fixtures, shelving and more. You name it, we’ve sold it. Yes, even rugs, leather, wine glasses, printer ink cartridges, pottery molds, sinks, tile and more.

What’s the heaviest item that you’ve ever sold?

A large press that weighed 150,000 pounds!

What’s the most expensive item that you’ve ever sold?

A press for $89,999

What’s the oddest thing you’ve ever bought?

15,000 hammers

What do you sell the most of?

Electrical items

Who are your customers?

Makers, machinists, hobbyists, welders, manufacturers, engineers, maintenance employees, DIYers, woodworkers, contractors, store and business owners

Why did you locate in Euclid, Ohio?

Euclid had the building that would work for us. We were able to commit to the space we needed at the time, while also having options to grow. It was perfect for our short- and long-term plans.

Edwin Merced HGR Employee of the MonthWho was your most recent employee of the month?

Edwin Merced, showroom operator, was nominated and voted April’s Employee of the Month by his coworkers at HGR. He was nominated for “supporting everyone with openness, honesty, trust and respect while working as a team to achieve our common goals. He creates exceptional customer relationships by enhancing awareness and expectations of outstanding service with every interaction. Edwin does all of this with a smile on his face.”

Who’s the employee who’s been there the longest?

There are 11 employees who have been here since the beginning, 19 years ago: Founder Paul Betori, Buyer Jeff Crowl, Partner Rick Affrica, Buyer Jim Ray, Partner Brian Krueger, Showroom Floor Supervisor Rich Lash, Sales Rep Steve Fischer, Receiving Supervisor Chuck Leonard, Partner Ron Tiedman, Sales Admin Libby Dixon, and retired Buyer Doug Kopp.

Brian and Ron started in sales and now are part owners, while Rick started as a buyer and now is a part owner. Chuck and Rich started as forklift operators and are now supervisors. Jim, Jeff and Steve have retained and expanded our clientele with their wisdom and mentor our buy and sales staff. Libby has consistently been our dependable sales admin and customer greeter.

HGR employee Chuck Leonard
Chuck
Andrew Ciecerko HGR employee
Andrew

Who’s the employee who drives the furthest?

We have employees who drive in from all over, including Cuyahoga, Medina, Summit and Stark counties, the far eastern suburbs, as well as Pennsylvania.

Chuck Leonard, receiving supervisor, lives in Erie, Pa., and drives 93 miles to work on Monday morning and 93 miles home on Friday night. The rest of the week, he stays 40 miles away in Geneva at his mom’s house. He’s done this for 19 years! That’s dedication.

Andrew Ciecerko, inventory clerk, lives in Williamsfield, Ohio, near the Pa. line. He drives 70 miles each way every day.

HGR aerial view

Thanks for reading! Do you have other questions about HGR that you would like answered?

HGR Industrial Surplus to give $500 scholarship to winning AWT RoboBots team on Apr. 29

Come on out to Lakeland Community College and join us to cheer on the high-school and middle-school teams as they compete to be the last battle bot standing. The battles begin at 8:30 a.m. The winning high school will be presented with a $500 scholarship check from HGR Industrial Surplus at the end of the event.

AWT RoboBots 2017 flyer

Are you going to the Ceramics Expo in Cleveland?

Ceramics Expo Logo

 

If you are, we’ll be there, too. Stop by Booth 905 from April 25-27, 2017, to see three pieces of equipment that we’ll have on display and pick up some cool swag, including coasters, lanyards, dispensers and BIG @$$ HGR pens. You can chat with one of our buyers, Mike Paoletto, our Chief Marketing Officer Matt Williams and some of our salespeople. We’re there because we buy ceramics and glass equipment from companies that are selling their lines for an upgrade and looking to recover assets.

What type of employer is HGR? Buyer spotlight with Bob Buerger

HGR buyer Bob BuergerWhen did you start with HGR and why?

2004, but I moved into the buyer role in 2014. My friends and I were at a Hell’s Angels dry poker run for Ronald McDonald House. One stop was a local bar called Stingers near HGR. Since it was the last stop, we thought we’d have a beer and ended up meeting Mike Lima, HGR’s shipping manager at the time, who said they were looking for someone in the incoming department. I applied, and they hired me. I also used to shop at McKean and HGR for years, especially on Wednesdays when we could have a free lunch and shop. I thought it was the neatest place. There’s no other place I’ve come across like HGR with its enormous size, its magnitude and what it does — even in all my travels now.

What were you doing before HGR?

I managed a metal finishing and plating company and was familiar with most of Mike Paoletto’s customers that he’s bought from. I like machinery and woodworking and have always been around it.

What is your territory, and what do you do on a daily basis?

Southern Missouri, southern Illinois, southern Kentucky, 75 percent of Tennessee, northwestern Alabama, Mississippi and Arkansas. I live about 30 minutes from Memphis.

Monday is office day to get caught up. On average, I am away from the house overnight 1.5 days per week. I travel from company to company looking at equipment and purchase what we can, which is about 15 percent of what we look at, on average. I see about three businesses per day but have seen up to six.

What do you like most about your job?

Meeting new people and new companies. At HGR, I saw all this equipment coming in but never saw it in operation, but now I go to huge manufacturing companies and get to see extrusion lines and robots in action and realize, “Oh, that’s how it’s made.” Every day is new in learning, and the job is fascinating.

What’s your greatest challenge?

The technology. I am not a computer person. When I first took this job, the only experience that I had was as an inventory clerk at HGR putting in information. And, I had a flip phone. The owners of HGR took a huge leap of faith giving me this position. Brian said, “Let’s give this guy a chance. He’s a good worker and always on time.” I was never late once and lived 30 minutes away. Even Rick had to teach me how to copy and paste.

When did you start with HGR and why?

2004, but I moved into the buyer role in 2014. My friends and I were at a Hell’s Angels dry poker run for Ronald McDonald House. One stop was a local bar called Stingers near HGR. Since it was the last stop, we thought we’d have a beer and ended up meeting Mike Lima, HGR’s shipping manager at the time, who said they were looking for someone in the incoming department. I applied, and they hired me. I also used to shop at McKean and HGR for years, especially on Wednesdays when we could have a free lunch and shop. I thought it was the neatest place. There’s no other place I’ve come across like HGR with its enormous size, its magnitude and what it does — even in all my travels now.

What were you doing before HGR?

I managed a metal finishing and plating company and was familiar with most of Mike Paoletto’s customers that he’s bought from. I like machinery and woodworking and have always been around it.

What is your territory, and what do you do on a daily basis?

Southern Missouri, southern Illinois, southern Kentucky, 75 percent of Tennessee, northwestern Alabama, Mississippi and Arkansas. I live about 30 minutes from Memphis.

Monday is office day to get caught up. On average, I am away from the house overnight 1.5 days per week. I travel from company to company looking at equipment and purchase what we can, which is about 15 percent of what we look at, on average. I see about three businesses per day but have seen up to six.

What do you like most about your job?

Meeting new people and new companies. At HGR, I saw all this equipment coming in but never saw it in operation, but now I go to huge manufacturing companies and get to see extrusion lines and robots in action and realize, “Oh, that’s how it’s made.” Every day is new in learning, and the job is fascinating.

What’s your greatest challenge?

The technology. I am not a computer person. When I first took this job, the only experience that I had was as an inventory clerk at HGR putting in information. And, I had a flip phone. The owners of HGR took a huge leap of faith giving me this position. Brian said, “Let’s give this guy a chance. He’s a good worker and always on time.” I was never late once and lived 30 minutes away. Even Rick had to teach me how to copy and paste.

What’s your favorite place to eat when you are on the road?

My favorite place to eat with the best burgers is Abe’s Grill in Mississippi. It’s 100 years old with 10-15 seats.

What do you enjoy doing when you’re not working?

My wife and I bought a house that was owned by a single mom who thought duct tape fixed everything; so, I spend a lot of my free time working on the house and outside in the yard. My wife said that she would really like a pool; so, we put an in-ground pool in last year.

Who is your hero or greatest influence/inspiration, and why?

My mom and dad. Mom because she gave me a great sense of humor. She taught me to laugh at myself. Dad because he gave me a great work ethic. He was a foreman at Ford Brookpark Foundry for more than 25 years. He’d leave for work at 5:30 a.m. in a white shirt and come home with a grey shirt. He had a stretch of about 150 days where he worked every day with no time off. He also is a combat Marine Corp. veteran who served in Korea. He taught me that if you work hard in life you get benefits.

Anything I missed that you want the rest of the team to know?

At HGR, if you give 100 percent and work hard, ownership will recognize you when a position becomes available. They’re always open to give someone a chance.

What do you enjoy doing when you’re not working?

My wife and I bought a house that was owned by a single mom who thought duct tape fixed everything; so, I spend a lot of my free time working on the house and outside in the yard. My wife said that she would really like a pool; so, we put an in-ground pool in last year.

Who is your hero or greatest influence/inspiration, and why?

My mom and dad. Mom because she gave me a great sense of humor. She taught me to laugh at myself. Dad because he gave me a great work ethic. He was a foreman at Ford Brookpark Foundry for more than 25 years. He’d leave for work at 5:30 a.m. in a white shirt and come home with a grey shirt. He had a stretch of about 150 days where he worked every day with no time off. He also is a combat Marine Corp. veteran who served in Korea. He taught me that if you work hard in life you get benefits.

Anything else that you want everyone to know?

At HGR, if you give 100 percent and work hard, ownership will recognize you when a position becomes available. They’re always open to give someone a chance.

What type of employer is HGR? Buyer spotlight with Jason Arnett

HGR Buyer Jason Arnett

When did you start with HGR and why?

June 2014. I was intrigued by the opportunity to have a multi-state territory and had a background in sales but this was different being on the buyer side rather than the sales side.

What were you doing before HGR?

Medical, equipment and specialty lumber sales

What is your territory, and what do you do on a daily basis?

The Midatlantic (Delaware, Maryland, Virginia and North Carolina)

Monday is spent in the office following up on offers and getting the schedule together, getting your appointments set for the week. The rest of the week is out on appointments and looking at equipment, taking pictures, and setting expectations with customers. The deals are sent through Dataflo and the offer goes out to the customer. Then, we follow up on offers, sometimes on Mondays and sometimes in the car driving between appointments. I spend one to two overnights per week out on the road.

What do you like most about your job?

I like being in front of the customers and interacting with them in person, basically, the whole process of the inspection.

What’s your greatest challenge?

Convincing some of the customers that they would do better selling to HGR as opposed to scrapping the equipment. It goes back to setting expectations and helping them to understand that we don’t offer retail pricing because we are an industrial reseller of used equipment.

What’s your most interesting moment at HGR?

The HGR volleyball tournament in January with another buyer and Founder Paul Betori singing karaoke. It was memorable.

What do you enjoy doing when you’re not working?

Cooking on the BBQ and smoking meat with a charcoal or wood fire.

Who is your hero or greatest influence/inspiration, and why?

My dad. He inspires by always giving 110% effort in everything he’s done. He runs marathons. He went back to law school in his early 40s and now works as a lobbyist. Recently, he wasn’t able to meet me for lunch because he was meeting with a congressman!

What type of employer is HGR? Q&A with HGR’s Inbound Logistics Department

HGR's receiving department
Bryan and Eric

(Courtesy of Guest Blogger Bryan Korecz, HGR’s inbound logistics manager)

What does your department do?

The Inbound Logistics Department is in constant contact with HGR’s vendors. We do not have much contact with customers who purchase items from HGR. After a buyer has made a purchase from a vendor we are in contact with the vendors until all items have been picked up. We ensure that the buying and shipping process goes smoothly for them and that they have a good experience and sell to HGR in the future. A day in the life would be 75-100 phone calls and email with vendors, trucking companies, dispatchers, buyers and then making it all come together so that the offloading of the equipment goes smooth here at HGR

How many people work in your department, and what are their roles?

My department is myself and Eric Karaba. He handles seven of the buyers, while I handle six and any purchases made by two of our owners, Rick Affrica and Brian Krueger.

What qualifications do you need to be successful in your department?

Patience. In this line of work, things will go wrong, and problems will come up. It happens all the time, and you just have to roll with it and adjust. Multitasking as well as being able to solve problems quickly.

What do you like most about your department?

I like that we play an integral role in the HGR “supply chain” process. I like that every day can be different, as well.

What challenges has your department faced and how have you overcome them?

We face challenges every day. You just have to learn from previous experiences and apply that knowledge to anything that will come up in the future.

What changes in the way your department does business have occurred in the past few years?

Two years ago, this department didn’t exist. We had an outside company do it for us, and we wanted to take control of it to better service our vendors and make the process smoother.

What continuous improvement processes do you hope to implement in the future?

We are in the process of implementing a process to ensure that equipment gets to HGR faster (so we can sell if faster) and more efficiently.

What is HGR’s overall environment like?

I think it is a pretty relaxed environment. We are able to get our work done.

What is your perspective on manufacturing, surplus, investment recovery/product life cycle/equipment recycling?

Before I came here I didn’t know much about the manufacturing industry. My experience was solely in shipping. During the course of the last two years, I have learned what certain machines are, what they are used for and what items HGR has success with.

Learn about the history of slo-pitch softball, which started in Cleveland, at the hall of fame and museum

History of start of softball at Slo-Pitch Softball Hall of Fame and Museum

In 1985, The Greater Cleveland Slo-Pitch Softball Hall of Fame began inducting members into the hall at its annual banquet. This continues to be the case today. But, in 1997, Founder Buddy Langdon and his partner had an idea for a hall of fame and museum in order to share the history of softball with the public. Originally, they planned to make it a mobile exhibit that could travel around the country by bus. Later, they approached the Cleveland-Style Polka Hall of Fame and Museum, then located in what is now the Shore Cultural Centre in Euclid, Ohio, to pitch the idea that both museums be housed in the historic, former Euclid City Hall building that the city had planned to condemn and demolish.

In 1998, both museums set up shop at 605 E. 222nd St., Euclid, Ohio. The softball hall of fame decided that Euclid was a central location between the furthermost east and west sides, and the city had teams that played in the biggest and best leagues. The museum is a nonprofit that is funded through ticket sales from its induction banquet, donations from visitors and an annual raffle fundraiser.

When I visited, I learned so much about the sport and the history of the area. The first slo-pitch team was formed in Cleveland in 1939 by the Jewish Recreation Commission. As Curator Rich Yonakor explains, “Since they celebrated the Sabbath on Saturday, it was something for them to do socially on Sundays. They decided to make the ball bigger and slower since everyone was not able to hit a baseball. Gambling occurred, as the community placed bets on the outcome of games. They decided to open the games up to the public.” One of the first softballs was made at a YMCA by taping up a ball of socks.

By the 1960s and early 1970s, there were 280 local teams competing in a single elimination tournament to go on to the world championship. Later, the tournaments changed to double elimination, and instead of one champion, one team comes out of every governing body and league. In 1975, Cleveland’s Pyramid Café team won the first world championship for the city. In softball’s heyday, most teams were sponsored by bars, restaurants and the unions within companies. HGR Sales Associate Andrew Pringle’s grandfather, Douglas Pringle, played softball in the 1960s and was inducted into the hall with his team.

Many people don’t know the difference between fast pitch and slo-pitch. Women’s fast pitch is played at the high school and college level where the pitcher winds up and throws the ball hard and fast in a straight line. The pitcher also is six feet closer to home plate. In slo-pitch, the ball is lobbed in an arch of 10 feet to 16 feet, depending on the governing body. Most have a rule of 10 to 12 feet. There are a multitude of governing bodies, and each has different rules regarding the type of bat used and the pitching arc.

Rich Yonakor at Slo-Pitch Softball Hall of Fame and MuseumToday, the sport has experienced a decline in popularity that Yonakor attributes to the electronic age where people are not getting out to play sports as much. He says the materials have changed dramatically and that “often the equipment is doing all of the work for them, not like in the old days when it was about competition and exercise. No one got hurt, and they all went out afterwards.” Now, the ball is harder; therefore, players can hit it further and over the fence for more home runs. The leagues have actually had to limit the number of home runs in a game on this account.

If you are a sports enthusiast, which you must be if you got to this point in the blog, when you stop to visit the museum, you can talk softball, baseball, basketball AND football with Yonakor. Does that name sound familiar? Yep, he’s the son of football legend John Yonakor, a member of the 1946-1950 All-American Football Conference Cleveland Browns. His father took him to every Browns home game from when Yonakor was four until he was 17. John Yonakor was originally drafted into the NFL Philadelphia Eagles, but Paul Brown offered to pay him more, $9,500 per year as opposed to $7,500. He also played in Canada for a year, with the New York Yanks for a year and with the Washington Redskins for a couple of years. His son, Rich, was recruited six years ago to assist Langdon in running the museum. When Langdon passed away, Yonakor took over. Rich Yonakor played NBA basketball for the San Antonio Spurs and then professional basketball for overseas teams, including Italy, France and Belgium, for a few years. He also was the softball director for the City of Euclid.

 

the main room at Slo-Pitch Softball Hall of Fame and Museum part of the Hall of Fame wall at the Slo-Pitch Softball Hall of Fame and Museum penants and shirts at the Slo-Pitch Hall of Fame and Museum

 

What do a Chicago crime boss and EHS’ competitors at the AWT RoboBots competition have in common?

Euclid High School robotics team working on its battle bot

(Courtesy of Guest Blogger Bob Torrelli, Euclid High School’s Science Department chair and Robotics Team coach)

They are going down!

We had a very successful meeting in March at SC Industries. The robot is totally together and all that’s left to do is shed 0.15 pounds and practice driving and using the weapon.

The Euclid High School Robotics Team has been relentless in solving the gear ratio problem between the motor and the weapon shaft. We finally got it resolved while we did work on the robot during spring break. So, without any other unforeseen problems, we will be ready to test it out this week at Fredon in the cage. We need to solder some specific connections onto the new 12-volt batteries, hook the electronics together, and attach the armor. We have about four weeks to test it and make sure it is competition ready for the 2017 RoboBots Battle on Apr. 29 at Lakeland Community College.

Our team name still is The Untouchables, and our robot’s name is Elliott Ness.

HGR Industrial Surplus is one of the team’s sponsors.

Great Scott Tavern helps build community

Great Scott Tavern

I had a sit down with Bob Edwardsen, general manager of Great Scott Tavern, 21801 Lakeshore Blvd., Euclid, Ohio, to find out more about how the restaurant came into being and how it has evolved since its opening in June 2015.

Bob’s known the owner, Mrs. Scott, since he was a child. His parents were friends with her and her husband. They traveled and spent holidays together. Before becoming a restauranteur, Mrs. Scott worked in real estate management and lived in New York for a time. But, now, she’s a Euclid resident.

According to Edwardsen, “Her lifelong dream was to have a restaurant. She wanted to locate it in her city because she feels that Euclid needs another good restaurant. She’s in here every day. This is like her child. She eats here all the time.”

Originally, Mrs. Scott bought the gas station next to the Beach Club Bistro where she intended to open the restaurant, but there was a parking issue. So, when the current location, a former office building, came up for sale, she bought the building, spent more than two years renovating it, tore down the gas station and created a parking lot that the restaurant shares with its neighbors. The restaurant specializes in American comfort food, and the décor reflects its desire to be cozy and inviting.

The restaurant has more local connections in its management team: Edwardsen grew up in Euclid. His assistant general manager, Tom Laurienzo, who Edwardsen calls “his right and left arm,” and current head chef live in Euclid. About Laurienzo, he says, “Tom started here as a server and was promoted. He is phenomenal at what he does and is a great person, too, with children and a wife while being active in his church. I don’t know how he finds the time.” As Edwardsen says in his staff meetings, “It takes a team to win.”

He made his way to Great Scott because he and Mrs. Scott shared the same cleaning lady. The cleaning lady told him about the ongoing renovations. Then, Mrs. Scott started coming to Edwardsen’s bar and restaurant on E. 200th to ask him questions about restaurant management. In February 2016, he joined her staff. His favorite menu items are the cabbage rolls and meatloaf. During Lent, the restaurant serves a fish fry made with Bob’s recipe that he served at his former restaurant.

The name Great Scott Tavern is a pun on words. First, it’s Mrs. Scott’s last name, but she also used it because of its association with film heroes, superheroes and comic-book characters, such as Christopher Lloyd’s character in the movie “Back to the Future,” Superman and Dennis the Menace when they utter that famous exclamation of surprise, “Great Scott!”

Mrs. Scott is heavily involved in philanthropy and in the community. The restaurant is a member of The Euclid Chamber of Commerce and the Euclid Kiwanis Club. It has participated in local events sponsored by the Greater Cleveland Food Bank and Taste the Neighborhood in Collinwood. The restaurant hosts meetings and parties for local organizations, such as Euclid Beach Park Now. She is also one of the sponsors of the Cleveland International Film Festival, and she is involved with the Henn Mansion, Shore Cultural Centre and Euclid Pet Pals.

Edwardsen also has a love for his community. He belongs to The Nobel-Monitor Lodge of the Swedish Vasa and is active at Holden Arboretum, about which he says, “I went there for the first time and thought it was fabulous. It took my mind off of everything. Before that, I buried myself in my work.” He also loves local sports and went to the Cavs’ Championship Parade, but The Cleveland Indians are his favorite team. He encourages others to get involved and says, “You have to build the community.”

Great Scott is open Tuesday through Thursday 4 p.m. to 10 p.m. and Friday and Saturday 4 p.m. to 11 p.m.

employees in kitchen at Great Scott Tavern

 

Enter to win HGR’s April 2017 “guess what it is” Facebook contest

spot welder sweat valve for HGR Facebook contest

Last month, we went too easy on you; so, we decided to make it a little harder this month to guess what piece of equipment or machinery is pictured. To participate, like our Facebook page, share the post, and add your guess in the comments section. Those who guess correctly and meet these criteria will be entered into a random drawing to receive a free HGR T-shirt.

Click here to enter your guess on our Facebook page by 11:59 p.m. on Friday, April 14, 2017. A winner will be drawn and announced the following week.

April is National Welding Month!

welder with shield and sparks

In support of the American Welding Society, we’re celebrating all the talented, hardworking welders who make many of the objects that we use and appreciate on a daily basis, especially those that get us where we need to go. Welding was discovered in the 1800s and has continued to make strides. Consider a career in welding and talk to your local community college or trade school, or let us know if you are a welder and what you weld. Thank you, welders!

If you’re looking for welding equipment, HGR Industrial Surplus has affordable new and used items to fit out your weld shop.

Pardon our dust

construction workers on renovation site for HGR demolitionHGR is gutting and rebuilding our front entrance, restrooms and sales office to better serve our customers. The construction work is being done at night while we are closed, but you will notice some changes in the next four months. We’ll be moving our desks around to accommodate the work being done, and the front restrooms are closed; so, customers will need to use the restrooms in Aisle 6 or in our back offices if you are unable to navigate the stairs to the restrooms.

Please excuse the shuffle while we make amazing improvements. You still can count on the same great products, service and prices.

Thanks!

Kiddie City Child Care Community hosts fundraiser

Kiddie City Child Care Community Euclid Ohio logo

HGR loves to support the Euclid community. If you live or work in the community, you might be interested in attending a comedy show and Chinese auction on Apr. 22 at Kiddie City, 280 E. 206th Street, Euclid, Ohio. The show starts at 7:30 p.m. with three local comedians. Snacks, beer, wine, pop and water will be included. It’s only $27 per couple and is tax deductible since it’s a fundraiser for Kiddie City, a 501 (c)(3) nonprofit in Euclid since 2006. This fundraiser occurs so that Kiddie City can continue to create a lifelong love of learning for children in its teachers’ care.

Jennifer Boger, Kiddie City’s director, says, “We’ve been doing this fundraiser for 10 years now to supplement summer programming for families in order to do enhancement and enrichment activities for the children that parents don’t need to pay for out of pocket since 80% of students are using childcare subsidy for lower-income families.”

For tickets, contact Kiddie City at 216-481-9044.

Get the flavors of Jamaica right here in Euclid, Ohio

Irie Jamaican Kitchen jerk chicken
Irie Jamaican Kitchen’s jerk chicken
Irie Jamaican Kitchen's curry chicken bowl
Irie Jamaican Kitchen’s curry chicken bowl
Irie Jamaican Kitchen's fish stew
Irie Jamaican Kitchen’s fish stew

 

 

 

 

 

 

 

 

 

 

 

 

 


I was planning a business lunch to talk about the Waterloo Arts District, redevelopment, travel and other things with a colleague at The City of Euclid. When I asked where we should go, she suggested a new Jamaican restaurant that people are raving about on E. 185th Street: Irie Jamaican Kitchen.

This small, cafeteria-style takeout is decorated in the bright colors of Jamaica (black, red, yellow, green). There is bar-style seating with a few stools, too. We dined in and got to meet Omar, the owner, and chat with him about his inspiration. It turns out he went to Cuyahoga Community College and Kent State University for culinary arts and hospitality management. He worked at restaurants his entire life.

Three years ago, he decided to fulfill his dream of owning a restaurant and working for himself. He opened Irie Jamaican Kitchen at Richmond Mall. One month ago, he moved to Euclid, where he currently lives, because he loves the community and felt it would offer a great customer base. So far, he’s doing well.

And, we can see why! Everything was fresh, tasty and full of flavor. There was so much to choose from, including healthy options. You could get a bowl (Jamaican version of Chipotle) with either salad or rice as the base. I got a salad bowl with jerk chicken, vinegar cucumber slaw, pineapple coleslaw and heavenly, carmelized, fried plantains. I also ordered a cup of thick, rich chicken-feet soup. My colleague had a rice bowl with curry chicken, mango salsa, plantains and sour cream. I wanted to try the fish stew in brown sauce, but there will always be another time.

 

Happy St. Patrick’s Day!

a stone carving of saint patrick on the lower door to the chapel royal of dublin castle in dublin, irelandHistory. It’s what we do. Old and new. The treasure chest (or pot of gold) to be found in the aisles of HGR’s showroom. We love the history of machines and buildings. So, on this day when everyone thinks about green beer, leprechauns, shamrocks and luck, remember that St. Patrick is one of the patron saints of Ireland. He lived in the fifth century.

And, there’s the well-known Irish Blessing, an ancient Celtic prayer, that you may have read before:

May the road rise up to meet you.

May the wind always be at your back.

May the sun shine warm upon your face

and rains fall soft upon your fields.

And until we meet again,

May God hold you in the palm of his hand.

There’s also this one:

May love and laughter light your days,
and warm your heart and home.
May good and faithful friends be yours,
wherever you may roam.
May peace and plenty bless your world
with joy that long endures.
May all life’s passing seasons
bring the best to you and yours!

Enjoy your day. We hope to see you soon.

 

 

What Type of Employer is HGR? Q&A with HGR’s Showroom Department

HGR's Showroom Department team

(Courtesy of Guest Blogger Rich Lash, HGR’s Showroom supervisor)

What does your department do?

The Showroom is the last chance to make sure things are displayed properly and as nice for the customer as possible. We think that keeping things orderly helps in the sale of the piece. Our goal is to take care of the customer in the best way possible.

How many people work in your department, and what are their roles?

The Showroom has seven employees. Our jobs consist of many different things: clearing walls of new inventory and taking it out to the showroom floor. We also are responsible for loading customers with the pieces that they have purchased, from 20 pounds to 40,000 pounds and more. Each Showroom employee is trained to treat each piece as if it is theirs.

What qualifications do you need to be successful in your department?

It starts with basic forklift operator skills, and by the time training is done, the forklift operator will be chaining, lifting and loading pieces with a 30,000-pound forklift with very little assistance from others.

What do you like most about your department?

We like dealing with the customer and trying to be the best at what we do and who we are.

What challenges has your department faced, and how have you overcome them?

HGR is remodeling different areas of the building, from repairing the roof to a new locker room and, soon, a new sales office. Each time, everyone has to help by moving things out of the way so work can be done. It is hard at times but the end result is great because the improvements are worth it. We have come a long way from the early days of HGR when there were 11 employees.

What changes in the way your department does business have occurred in the past few years?

Well, before eBay, we had a lot more customer walk-in traffic, which sometimes made it difficult to get through the showroom with sold pieces for customers. Since eBay, it seems that sales have gone up but customer traffic has gone down, which makes it easier to get through the showroom.

What continuous improvement processes do you hope to implement in the future?

I think training is the key to making things better in the showroom and in every department, for that matter. Knowing your product and how to treat it and display it sure makes a difference.

What is HGR’s overall environment like?

HGR has been a very pleasant and enjoyable place to work over the years. The people I work with and the people I work for are just great. I have never worked for a company that tries to make their employees feel good with company picnics, gift cards, rewards and a holiday party like HGR has. They also have a profit-sharing program for the employees that sets them apart from other companies.

Contact (Name of Sales Rep)

    [dynamichidden dynamichidden-374 id:hidden_to_email]
    [dynamichidden dynamichidden-139 id:hidden_item_number]
    [dynamichidden dynamichidden-91 "CF7_URL"]
    [dynamichidden dynamichidden-303 id:new_customer]
    [dynamichidden dynamichidden-799 id:cant_remember]
    [dynamichidden dynamichidden-782 id:cc_emails]
    [dynamichidden dynamichidden-973 id:bcc_emails]
    Your Name*
    Your Email Address*
    Confirm Your Email Address*
    Your Phone Number
    Company Name
    Item Number [dynamictext dynamictext-999 id:item_number_show]
    Your Message*
    [recaptcha]

    Contact (Name of Sales Rep)

      [dynamichidden dynamichidden-738 id:hid_item_num]
      [dynamichidden dynamichidden-424 id:hid_email]
      [dynamichidden dynamichidden-91 "CF7_URL"]
      [dynamichidden dynamichidden-12 id:new_customer_pp]
      [dynamichidden dynamichidden-170 id:cant_remember_pp]
      [dynamichidden dynamichidden-988 id:cc_emails_pp]
      [dynamichidden dynamichidden-465 id:bcc_emails_pp]
      Your Name*
      Your Email Address*
      Confirm Your Email Address*
      Your Phone Number
      Company Name
      Item Number [dynamictext dynamictext-851 id:item_number_show_pp]
      Your Message*
      [recaptcha]